Search results
Results From The WOW.Com Content Network
In radar -related subjects and in JTIDS, a data mile is a unit of distance equal to 6000 feet (1.8288 kilometres or 0.987 nautical miles ). An international mile is exactly 0.88 of a data mile. The speed of light is 983571056 ft/s, or about one foot per nanosecond. If it were exactly one foot per nanosecond, and a target was one data mile away ...
The template takes a three-digit Flight level number and converts it into feet and meters. Usage. Flight level | 10}} → FL010 (1,000 ft; 300 m)
Conversion of units is the conversion of the unit of measurement in which a quantity is expressed, typically through a multiplicative conversion factor that changes the unit without changing the quantity. This is also often loosely taken to include replacement of a quantity with a corresponding quantity that describes the same physical property.
SFM is a combination of diameter and the velocity ( RPM) of the material measured in feet-per-minute as the spindle of a milling machine or lathe. 1 SFM equals 0.00508 surface meter per second (meter per second, or m/s, is the SI unit of speed). The faster the spindle turns, and/or the larger the diameter, the higher the SFM.
The acre-foot is a non- SI unit of volume equal to about 1,233 m 3 commonly used in the United States in reference to large-scale water resources, such as reservoirs, aqueducts, canals, sewer flow capacity, irrigation water, [1] and river flows. An acre-foot equals approximately an eight-lane swimming pool, 82 ft (25 m) long, 52 ft (16 m) wide ...
30.48 cm. 304.8 mm. The foot (standard symbol: ft) [1] [2] is a unit of length in the British imperial and United States customary systems of measurement. The prime symbol, ′, is commonly used to represent the foot. [3] In both customary and imperial units, one foot comprises 12 inches, and one yard comprises three feet.
In aviation, pressure altitude is the height above a standard datum plane (SDP), which is a theoretical level where the weight of the atmosphere is 29.921 inches of mercury (1,013.2 mbar; 14.696 psi) as measured by a barometer. [2] It indicates altitude obtained when an altimeter is set to an agreed baseline pressure under certain circumstances ...
Height above mean sea level is a measure of a location's vertical distance ( height, elevation or altitude) in reference to a vertical datum based on a historic mean sea level. In geodesy, it is formalized as orthometric height. The zero level varies in different countries due to different reference points and historic measurement periods.