Search results
Results From The WOW.Com Content Network
Alcohol by volume (abbreviated as alc/vol or ABV) is a standard measure of the volume of alcohol contained in a given volume of an alcoholic beverage, expressed as a volume percent. [ 1 ] [ 2 ] [ 3 ] It is defined as the number of millilitres (mL) of pure ethanol present in 100 mL (3.5 imp fl oz; 3.4 US fl oz) of solution at 20 °C (68 °F).
Ethanol (also called ethyl alcohol, grain alcohol, drinking alcohol, or simply alcohol) is an organic compound with the chemical formula CH 3 CH 2 OH. It is an alcohol, with its formula also written as C 2 H 5 OH, C 2 H 6 O or EtOH, where Et stands for ethyl. Ethanol is a volatile, flammable, colorless liquid with a characteristic wine-like ...
Properties of aqueous ethanol solutions. Data obtained from Lange 1967. Mass fraction, %. Volume concentration, %. Mass concentration, g/ (100 ml) at 15.56 °C. Density relative to 4 °C water [citation needed] Density at 20 °C relative to 20 °C water.
The strength of beer is measured by its alcohol content by volume expressed as a percentage, that is to say, the number of millilitres of absolute alcohol (ethanol) in 100 mL of beer. The most accurate method of determining the strength of a beer would be to take a quantity of beer and distill off a spirit that contains all of the alcohol that ...
Homeopathic dilutions. In homeopathy, homeopathic dilution (known by practitioners as "dynamisation" or "potentisation") is a process in which a substance is diluted with alcohol or distilled water and then vigorously shaken in a process called "succussion". Insoluble solids, such as quartz and oyster shell, are diluted by grinding them with ...
As one of the simplest hydroxides, sodium hydroxide is frequently used alongside neutral water and acidic hydrochloric acid to demonstrate the pH scale to chemistry students. [12] Sodium hydroxide is used in many industries: in the making of wood pulp and paper, textiles, drinking water, soaps and detergents, and as a drain cleaner. Worldwide ...
The conversion between hydroxyl value and other hydroxyl content measurements is obtained by multiplying the hydroxyl value by the factor 17/560. [2] The chemical substance may be a fat, oil, natural or synthetic ester, or other polyol. [3] ASTM D 1957 [4] and ASTM E222-10 [5] describe several versions of this method of determining hydroxyl value.
4 and OH − do not account for a significant fraction of the total amount of ammonia except in extremely dilute solutions. [6] The concentration of such solutions is measured in units of the Baumé scale , with 26 degrees Baumé (about 30% of ammonia by weight at 15.5 °C or 59.9 °F) being the typical high-concentration commercial product.