Search results
Results From The WOW.Com Content Network
Dry weight. 550 to 650 lb (250 to 290 kg) [citation needed] The Pontiac V8 engine is a family of overhead valve 90° V8 engines manufactured by the Pontiac Division of General Motors Corporation between 1955 and 1981. The engines feature a cast-iron block and head and two valves per cylinder.
The Pontiac straight-8 engine is an inline eight-cylinder automobile engine produced by Pontiac from 1933 to 1954. Introduced in the fall of 1932 for the 1933 models, it was Pontiac's most powerful engine at the time and the least expensive eight-cylinder engine built by an American automotive manufacturer. During its 21-year run displacement ...
A rear wheel drive bellhousing is displayed at right, and the integrated front wheel drive bellhousing is displayed at the lower right (in this case, as a part of the GM 6T70 Transmission). GM 60-Degree 2.8/3.1/3.4/3.5/3.9 L V6 (also used by AMC) Buick 3300/3800 V6. Cadillac HT4100/4.5/4.9 L V8.
Engine bay of a 1988 Pontiac Fiero Formula. The L44 was produced from 1985 to 1988, replacing the LH7. It was the first transverse 2.8 L (2,837 cc) to use multiport fuel injection, and was a High Output ("9-code") engine option for the higher performance A-cars, X-cars, and Pontiac Fiero. This engine produced 140 hp (104 kW) at 5200 rpm and 170 ...
Pontiac offered only eight-cylinder engines during 1933 and 1934. GMC also switched to the 200 cubic inch engine in 1929, using it into early in the 1933 model year. Flathead Six 208. In 1935, Pontiac re-introduced their six-cylinder engine, as a 208 cu in (3.4 L) straight-6. The 208 was produced in 1935 and 1936. It was a side-valve design ...
Category:Pontiac engines. Category. : Pontiac engines. Automobile engines produced by the Pontiac division of General Motors . Wikimedia Commons has media related to Pontiac engines.
The engine was a 195 cubic inch (3.2 L) straight-4 marketed as the "Trophy 4," derived from the right cylinder bank of Pontiac's 389 cubic inch "Trophy 8" V8 engine. The Tempest featured a drivetrain with a rear-mounted transaxle [9] that was coupled to a torque shaft arcing in a 3 in (76 mm) downward bow within a curved, longitudinal tunnel.
Predecessor. 301.6 cu in (4.9 L) Pontiac 301. The Pontiac 301 Turbo is an engine that Pontiac produced for the 1980 and 1981 Trans Am. It was a V8 engine with a displacement of 301 cubic inch which produced an officially factory rated 210 hp (157 kW) and 345 lb⋅ft (468 N⋅m) of torque in 1980. In 1981 it underwent some changes and offered a ...