Search results
Results From The WOW.Com Content Network
Decibel is a logarithmic unit used to express the ratio between two values of a physical quantity, often power or intensity.
Signal-to-noise ratio ( SNR or S/N) is a measure used in science and engineering that compares the level of a desired signal to the level of background noise. SNR is defined as the ratio of signal power to noise power, often expressed in decibels. A ratio higher than 1:1 (greater than 0 dB) indicates more signal than noise.
dBc dBc ( decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. For example, phase noise is expressed in dBc/ Hz at a given frequency offset from the carrier. dBc can also be used as a measurement of Spurious-Free Dynamic Range ( SFDR) between the desired signal and unwanted spurious outputs resulting from the use of signal converters such ...
Sound power or acoustic power is the rate at which sound energy is emitted, reflected, transmitted or received, per unit time. [1] It is defined [2] as "through a surface, the product of the sound pressure, and the component of the particle velocity, at a point on the surface in the direction normal to the surface, integrated over that surface." The SI unit of sound power is the watt (W). [1 ...
A-weighting is applied to instrument-measured sound levels in an effort to account for the relative loudness perceived by the human ear, as the ear is less sensitive to low audio frequencies. It is employed by arithmetically adding a table of values, listed by octave or third-octave bands, to the measured sound pressure levels in dB.
Peak signal-to-noise ratio Peak signal-to-noise ratio ( PSNR) is an engineering term for the ratio between the maximum possible power of a signal and the power of corrupting noise that affects the fidelity of its representation. Because many signals have a very wide dynamic range, PSNR is usually expressed as a logarithmic quantity using the decibel scale.
Noise calculation is the process of calculating the level of noise immission using the metric dB (A). Noise immission is created by noise sources (noise emission) of various types which are propagating noise into the environment. A single source will create a certain level of immission primarily driven by originating sound power level and distance influenced by e.g. absorption and reflection ...
The decibel ( dB) is a dimensionless unit, used for quantifying the ratio between two values, such as signal-to-noise ratio. The dBm is also dimensionless, [1] [2] but since it compares to a fixed reference value, the dBm rating is an absolute one.