Search results
Results From The WOW.Com Content Network
For example, when connecting a mobile phone to a Bluetooth headset, SDP will be used to determine which Bluetooth profiles are supported by the headset (headset profile, hands free profile, advanced audio distribution profile, etc.) and the protocol multiplexer settings needed to connect to each of them.
An audio engineer adjusts a mixer while doing live sound for a band. A mixing console or mixing desk is an electronic device for mixing audio signals, used in sound recording and reproduction and sound reinforcement systems. Inputs to the console include microphones, signals from electric or electronic instruments, or recorded sounds.
Singer Cody Simpson using a wireless microphone headset in a 2013 concert in Montreal. A wireless microphone, or cordless microphone, is a microphone without a physical cable connecting it directly to the sound recording or amplifying equipment with which it is associated. Also known as a radio microphone, it has a small, battery-powered radio ...
Bluetooth HID is a lightweight wrapper of the human interface device protocol defined for USB. The use of the HID protocol simplifies host implementation (when supported by host operating systems) by re-use of some of the existing support for USB HID in order to support also Bluetooth HID. Keyboard and keypads must be secure.
Website. www .bluetooth .com. A Bluetooth earbud, an earphone and microphone that communicates with a cellphone using the Bluetooth protocol. Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances and building personal area networks (PANs).
Phone connector (audio) Phone plug mated in a phone socket. The plug's grooved tip is held firmly by the socket's spring tip contact. When not mated, this spring instead connects to the flat switch contact for detecting a plug. A phone connector is a family of cylindrically -shaped electrical connectors primarily for analog audio signals.
In a noisy environment, both microphones receive noise at a similar level, but the primary mic receives the desired sounds more strongly. Thus if one signal is subtracted from the other (in the simplest sense, by connecting the microphones out of phase) much of the noise is canceled while the desired sound is retained.
There are two types of Bluetooth headsets. Headsets using Bluetooth v1.0 or v1.1 generally consist of a single monaural earpiece, which can only access Bluetooth's headset/handsfree profile. Depending on the phone's operating system, this type of headset will either play music at a very low quality (suitable for voice) or will be unable to play ...