Ads
related to: right angle clamping brace for woodworking
Search results
Results From The WOW.Com Content Network
Vise. A bench vise, B machine vise, C hand vise. A vise or vice ( British English) is a mechanical apparatus used to secure an object to allow work to be performed on it. Vises have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever.
A short, straight cut made at a right angle to a curved layout so that sharper-than-normal curves can be cut with a jig saw or band saw. riffler A paddle-shaped rasp. rift sawn Rip-sawing of lumber perpendicular to the grain, often confused with quarter-sawn. ring shake A natural type of split (shake) occurring between the annual growth rings. rip
A mitre clamp alone (top) and holding wood (bottom). Mitre clamps or miter clamps clamps are designed to hold mitre joints together. History. The earliest mitre clamps are a simple spring in a C-shape with sharpened points that are sprung onto the outside corner of the mitre joint. [citation needed] In a later design, right angled plates are ...
Miter joint of two pipes. A miter joint ( mitre in British English) is a joint made by cutting each of two parts to be joined, across the main surface, usually at a 45° angle, to form a corner, usually to form a 90° angle, though it can comprise any angle greater than 0 degrees. It is called beveling when the angled cut is done on the side ...
Tie (engineering) A hurricane tie used to fasten a rafter to a stud. A tie, strap, tie rod, eyebar, guy-wire, suspension cables, or wire ropes, are examples of linear structural components designed to resist tension. [1] It is the opposite of a strut or column, which is designed to resist compression. Ties may be made of any tension resisting ...
1) Through tenon and 2) mortise as a shouldered joint. A mortise and tenon (occasionally mortice and tenon) joint connects two pieces of wood or other material. Woodworkers around the world have used it for thousands of years to join pieces of wood, mainly when the adjoining pieces connect at right angles. Mortise and tenon joints are strong ...
Brace (tool) A brace is a hand tool used with a bit ( drill bit or auger) to drill holes, usually in wood. Pressure is applied to the top while the handle is rotated. If the bit's lead and cutting spurs are both in good working order, the user should not have to apply any pressure other than for balance: the lead will pull the bit through the wood.
A bolted joint is one of the most common elements in construction and machine design. It consists of a male threaded fastener (e. g., a bolt) that captures and joins other parts, secured with a matching female screw thread. There are two main types of bolted joint designs: tension joints and shear joints. The selection of the components in a ...
Ads
related to: right angle clamping brace for woodworking