Search results
Results From The WOW.Com Content Network
OHV 2 valves × cyl. The GMC V6 is a family of 60-degree V6 engines produced by the GMC division of General Motors from 1959 through 1974. It was developed into both gasoline and diesel versions, and produced in V8 and V12 derivatives. Examples of this engine family were found in pickup trucks, Suburbans, heavier trucks, and motor coaches.
The General Motors 60° V6 engine family is a series of 60° V6 engines produced for both longitudinal and transverse applications. All of these engines are 12-valve cam-in-block or overhead valve engines, except for the LQ1 which uses 24 valves driven by dual overhead cams. These engines vary in displacement between 2.8 and 3.4 litres (2,837 ...
Chevrolet V8 big-blocks. Chevrolet V8 small-blocks. Chevrolet V6 90°. Pontiac L4 Iron Duke for RWD (later versions may use a FWD pattern) Jeep (1980-1983) equipped with Iron Duke. Chevrolet L6 Turbo-Thrift engine (post-1962) Chevrolet L4 153 (includes the Vortec 3000/181 industrial/marine crate motor) Detroit Diesel V8s. Duramax V8.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
LX5 (Shortstar) The GM High Feature engine (also known as the HFV6, and including the 3600 LY7 and derivative LP1) is a family of modern DOHC V6 engines produced by General Motors. The series was introduced in 2004 with the Cadillac CTS and the Holden Commodore (VZ) . It is a 60° 24-valve design with aluminum block and heads and sequential ...
1967–1972 GMC Truck 60-degree V8 (derived from the GMC 60-degree V6) 1967–1984 Cadillac New V8; 1969–1984 Holden 253; 1969–2000 Holden 308 (stroke reduced in 1985, making it 304 cu in (5.0 L); 350 cu in (5.7 L) version also produced from mid 1994 for use by HSV) 1982–1995 Cadillac HT
GMC's own V8 was the 637-cubic-inch (10.4 L) unit, which was essentially a 478 V6 with two cylinders added. It shared the 5.125 in × 3.86 in (130.2 mm × 98.0 mm) bore and stroke and used a single camshaft. It was manufactured in gasoline and diesel versions, and was the largest-displacement production gasoline V8 ever made for highway trucks.
1984-1999 Nissan VG30E 60-degree engine Toyota 1GR-FE 4.0 Litre 60-degree V6 Engine. A V-angle of 60 degrees is the optimal configuration for V6 engines regarding engine balance. When individual crank pins are used for each cylinder (i.e. using a six-throw crankshaft), an even firing interval of 120 degrees can be used.